Error Code E18

Dishwasher Error E18

A) Supply hose kinked - Ensure that the supply hose is installed without kinks.

B) Filters in the water connection of the supply or AquaStop hose blocked. - Clean the filters in the water supply hose. Attention: AquaStop safety device contains an electric valve, do not immerse in water.

Instructions:
1. Turn the tap off.
2. Take the hose off the tap.
3. Clean the filters using a small brush.
4. In the case of appliances without an AquaStop, also remove the hose from the back of the appliance. Take out the filter with pliers and clean it.
5. Reconnect the hose and check it for leaks.

C) Tap jammed or limescaled ― as a result water pressure is too low - Check the water pressure directly on the tap using a bucket. Approximately 10 litres of water per minute must flow out of the fully opened tap. Contact your fitter if the water pressure is too low.

Contact & Info

Get in touch

We’re here to help, before and after your purchase.

Customer Care Centre

Address: 38C Jalan Pemimpin, #01-01, Singapore 577180

Open from Mon - Fri, 8.30am - 5.30pm (Closed on Sat, Sun and PH).

Customer Care Hotline

Phone: +65 6751 5000

Monday to Friday: 9am to 6pm Saturday: 9am to 1pm (Closed on Sun and PH)

Help is on the way

Arrange a visit for any date and time convenient for you.

Locate the rating plate

Identify your appliance to find your E-Nr (model) and FD (producion) number. You need these for product registration and booking your repair service.

Self-help videos

Find out how to do simple troubleshooting for your appliance by exploring the video library.